Trust your ride to Hogs Breath Cycles -- Hostion, Missouri Hogs Breath Cycle - Harley Service

Harley Davidson Service

You just pulled the trigger on that Harley you’ve always wanted now it’s time to take care of that investment. Hog’s Breath Cycles knows what it takes to keep your pride and joy in top condition. With a host of service options performed by our highly trained personnel, you can rest assured that your machine will give you thousands of trouble free miles.

Hog's Breath you Harley Source

We offer Harley Davidson approved synthetic and conventional oils that maintain your Harley Davidson factory warranty.

Your service options include:

2500 Mile Service

This is the basic all around service performed every 2500 miles
(5000 with Synthetic oil) and includes the following:

  • Change motor oil and filter
  • Inspect and service air cleaner
  • Change primary oil/adjust primary chain
  • Change transmission oil
  • Check and adjust clutch
  • Check and adjust drive belt
  • Lubricate shift and brake levers*
  • Inspect brakepads and rotors
  • Inspect brake fluid level and condition
  • Inspect brake lines and oil lines for leaks
  • Lubricate hand controls cables and jiffy stand
  • Check idle speed and operation of enrichner*
  • Inspect fuel lines and fittings
  • Check operation of all electrical equipment and switches
  • Check and clean battery connections and charging system operation
  • Inspect tires check pressure and spokes*
  • Inspect air suspension for leakage*
  • Adjust and lubricate neck bearings*
  • Lubricate hinges and latches*
  • Check spark plugs
  • Road test
  • *if applicable

5000 Mile Service

This service is performed every 5000 miles (10000 with synthetic oil) and includes the following

  • Change engine oil & oil filter.
  • Inspect air cleaner and service as required.
  • Clean tappet oil screen.*
  • Change primary chaincase lubricant and clean magnetic drain plug.
  • Check clutch adjustment.
  • Change transmission lubricant and clean the magnetic drain plug.*
  • Check and adjust chains/belt.
  • Grease the foot shift/brake lever bearings * and speedometer cable.
  • Check rear brake pedal adjustment.
  • Inspect brake pads and discs for wear.
  • Check brake fluid reservoir levels and conditions.
  • Inspect oil lines and brake system for leaks.
  • Lubricate the following: front brake hand lever, throttle control cables, clutch control cable and hand lever.
  • Check operation of throttle and enrichener controls.
  • Inspect fuel valve, lines and fittings for leaks.
  • Clean fuel tank filter screen.
  • Check tire pressure and inspect tread.
  • Check wheel spoke tightness.*
  • Check front fork bearing adjustment.
  • Check operation of all electrical equipment and switches.
  • Check cruise control disengage switch & other components.*
  • Check battery electrolyte level. Check and clean battery connections.
  • Inspect spark plugs.
  • Check condition of rear shock absorbers.
  • Check air suspension – pressure, operation and leakage.*
  • Check engine mounts.
  • Check tightness of all fasteners except engine head bolts.
  • Check ignition timing and vacuum hose.
  • Check engine low and fast idle speed adjustment.
  • Road test.
  • *if applicable

10000 Mile Service

This is the big boy and is performed every 10000 miles (20000 with synthetic oil) and includes the following

  • Change engine oil & oil filter.
  • Inspect air cleaner and service as required.
  • Clean tappet oil screen.*
  • Change primary chaincase lubricant and clean magnetic drain plug.
  • ck and adjust chains/belt.
  • Grease the foot shift/brake lever bearings * and speedometer cable.
  • Check rear brake pedal adjustment.
  • Inspect brake pads and discs for wear.
  • Check brake fluid reservoir levels and conditions.
  • Inspect oil lines and brake system for leaks.
  • Lubricate the following: front brake hand lever, throttle control cables, clutch control cable and hand lever.
  • Check operation of throttle and enrichener controls.
  • Inspect fuel valve, lines and fittings for leaks.
  • Clean fuel tank filter screen.
  • Check cruise control disengage switch & other components.*
  • Check battery electrolyte level. Check and clean battery connections.
  • Change spark plugs.
  • Check tire pressure and inspect tread.
  • Check wheel spoke tightness.*
  • Repack wheel bearings with grease.
  • Inspect, adjust and lube front fork bearing.
  • Change front fork oil.*
  • Repack rear fork bearings.*
  • Inspect and adjust Springer rocker bearings.*
  • Check condition of rear shock absorber.
  • Check air suspension – pressure, operation and leakage.*
  • Check stabilizer links * and engine mounts.
  • Check tightness of all fasteners except engine head bolts.
  • Check ignition timing and vacuum hose.
  • Check engine low and fast idle speed adjustment.
  • Road test.
  • *if applicable
Harley Service Pros, Service techs that love your ride as much as you do.

Common Maintenance Items

In addition to the service and repair we do on a daily basis on Harley Davidson and V-Twin motorcycles, we provide a number of common maintenance services for our customers, including(but not limited to)

  • Safety inspections
  • Buyers inspection services
  • Tune-ups
  • Engine upgrades
  • Engine performance tuning
  • Tires
  • Brakes
  • Electrical diagnostics
  • And many other services

Insurance Repairs

Insurance repairs welcome! We are a designated insurance repair facility with complete paint and part repair services for V-Twin motorcycles.

Motorcycle too damaged to ride? Inquire about our "Damage Free" emergency breakdown towing services.

Performance and Custom Work

Hog’s Breath Cycles also offers a full range of custom work from light fabrication to full custom bike builds from the ground up. Call Michael or Ryan for a quote on the custom of your dreams.

We also offer a full line of performance engine work from a stage one kit to a full on 150 horsepower mountain motor. See our Dyno page for a full description of the work we do.

V-Twin